額定測量電流:100A~800A;測量范圍:±110A~±880A;額定輸出電壓:2.5V±2V

安裝方便
體積小,節省空間
無插入損耗
抗干擾能力強

交流變速驅動器
直流電機驅動靜態轉換器
通訊電源
不間斷電源
開關電源
電動汽車

通過ISO 9001:2015
參考標準∶JB/T 7490-2007
儲存環境∶溫度-40℃~ +125℃,相對濕度:不大于 95%(25℃)
電氣性能 ELECTRICAL PROPERTIES( 除非另有說明,否則環境參數均為@ TA = 25℃,RL = 10 k?) | ||||||||
型號 | KCS10G-XXX IP500 | |||||||
額定測量電流IP | 100A | 200A | 300A | 400A | 500A | 600A | 700A | 800A |
測量范圍 IPM | ±110A | ±220A | ±330A | ±440A | ±550A | ±660A | ±770A | ±880A |
額定輸出電壓 VOUT | 2.5V±2V | |||||||
零點。失調電壓VO | 2.5V±20mV 0.5 / 0 3.15 | |||||||
電源電壓VC | +5VDC(± 5%) | |||||||
負載電阻 RM | ≥10KΩ | |||||||
線性度 εL | ≤0.5%FS | |||||||
總體精度 X | ±1%FS(@ TA = 25℃) | |||||||
零點失調電壓溫漂VOUT | ±0.2mV/℃ | |||||||
幅度電壓溫度漂移VOUT | ≤0.05%/℃ | |||||||
靜態電流消耗IC | ≤20mA | |||||||
響應時間TR @90% | <7us | |||||||
頻帶寬度BW | DC~100kHz | |||||||
di/dt跟隨精度 | >50A/us | |||||||
絕緣耐壓 VD | 50Hz,1min,2KV | |||||||
工作環境溫度TA | -40~+125℃ | |||||||
質量 m | ≈11g | |||||||
定制Customized: 如上表沒有適合您使用的產品,我司可根據您的技術和結構要求為您量身定制產品。請聯系我們。

機械特性Mechanical characteristics | |
一般公差General tolerance | ± 0.5 mm |
其它公差執行 Other tolerance execution | GB/T 1804-2000-M |
固定孔尺寸 Fixing hole size | Φ2.0mm |
連接器Connection of secondary | 0.5*0.5mm |
建議焊接溫度 Recommended wave soldering temperature | 265℃±5℃ |
注意Remarks:
錯誤的接線可能導致傳感器損壞。
The false wiring may result in the damage of the sensor.
Ip方向與產品箭頭方向一致時,輸出電壓為正極。
VOUT is positive when IP flows in the direction of the arrow.
當初級導體完全充滿初級孔徑時動態表現(di/dt和響應時間)為最佳效果。
Dynamic performances (di/dt and response time) are best with a single bar completely filling the primary hole.
初級導體的溫度不應超過100℃。
Temperature of the primary conductor should not exceed 100°C.